77范文网 - 专业文章范例文档资料分享平台

GMW14651_06MR07_Material Related Interior Plastic Part Perfo(4)

来源:网络收集 时间:2021-04-05 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

GMW14651GM WORLDWIDE ENGINEERING STANDARDS

8 Coding System

This specification shall be referenced in otherdocuments, drawings, VTS, CTS, etc. as follows:GMW14651

Test pieces shall be exposed for (400 ± 2) h in ahumidity cabinet operating at (+80 ± 3) °C and(75 ± 5) % relative humidity.

Test pieces shall show no significant surfacechanges, particularly changes in color or gloss, orother changes detrimental to serviceability. Testpieces shall comply with the dimensions specifiedon the drawing after completion of the test.For the humidity ageing assessment, thecomponent shall show no breakage or cracks. Thetest pieces shall be examined with the naked eye.Requirement to impact resistance:GMW14093 - 2 / min 2.5 J.4.13 Mildew Growth.

Note:Only for parts containing materials withnatural contents e.g. jute, sisal, hemp, flax,cellulose, wool, cotton etc.:

Mildew Growth to GMW3259 – No mildew.4.14 Thickness Swell (GMW14777, GME 60351).Note:Only for parts containing materials withnatural contents e.g. jute, sisal, hemp, flax,cellulose, wool, cotton etc.:

Thickness swell to GMW14777 – G – 40 % max.

9 Release and Revisions

9.1 Release.This standard originated inOCT 2005. It was first approved by GlobalMaterials Team. It was first published inMAR 2007.

It supersedes all regional interior part performancespecifications for use on Global Engineered Partsincluding but not limited to: GME 00004

5 Provisions for Shipping

Not applicable.

6 Notes

6.1 Glossary.

Monolithic Plastic Part: Plastic Part created inone piece. It signifies plastic parts without anysubcomponents.

6.2 Acronyms, Abbreviations, and Symbols.Not applicable.

7 Additional Paragraphs

7.1All parts or systems supplied to thisspecification must comply with the requirements ofGMW3059, Restricted and ReportableSubstances for Parts.

7.2For further information refer to part drawings.7.3Raw Material Approved Sources.The rawmaterial approved sources of the plastic part shallbe listed in MATSPC (GM Materials File) under aGM plastic material specification (e.g. a GMP, aQK, a HN, a EDS specification). This GM plasticmaterial specification shall be noted on the partdrawing and/or in the math data file of the drawingof the plastic part.

© Copyright 2007 General Motors Corporation All Rights Reserved

March 2007Page 4 of 6

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说教育文库GMW14651_06MR07_Material Related Interior Plastic Part Perfo(4)在线全文阅读。

GMW14651_06MR07_Material Related Interior Plastic Part Perfo(4).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/jiaoyu/1210813.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: