77范文网 - 专业文章范例文档资料分享平台

GMW14651_06MR07_Material Related Interior Plastic Part Perfo(2)

来源:网络收集 时间:2021-04-05 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

GMW146512 References

GM WORLDWIDE ENGINEERING STANDARDS

The datasheet in Appendix A may be used.3.6 Deviations from Test Procedure.Deviationsfrom the requirements of the test procedures shallhave been agreed upon. Such requirements shallbe specified on component drawings, testcertificates, reports, etc.

Note:Only the latest approved standards areapplicable unless otherwise specified.2.1 External Standards/Specifications.MVSS 302

2.2 GM Standards/Specifications.GM2617MGM9538PGME 00004GME 60280GMI 60266GMW14093GMW14334GMW14352GMW14688GMW3059GMW3232GMW3259GMW8081

GM9517PGM9900PGME 60271GME 60351GMI 60275GMW14162GMW14334GMW14444GMW14777GMW3205GMW3235GMW3417

4 Requirements and Procedure

4.1 Colorfastness to Artificial Light(GMW14162) / Natural Weathering(GMW3417/GM9538P).Until there is anagreement on natural weathering versus artificiallight testing, each region will use it ownrequirements.

See for current regional requirements, e.g.GME 00004 and GM2617M.

4.2 Resistance to Cleaning Agents (GMW14334/ GMI 60266 / GM9900P).

Note:No testing for parts in non visible areas.Resistance to cleaning agents to GMW14334 -Rating 1.Test media:

Commercial vehicle interior cleaning agent(e.g. Sonax 321200, Armor All Cleaner, ArmorAll Protectant) Commercial window cleaning agent, (e.g.Windex Glass Cleaner Blue, Formula 409)4.3 Fogging,Volatility of Organic Constituents(GMW3235).

Note:No testing for parts in non visible areas.Volatility of organic constituents to GMW3235 - B -condensable constituents 2.0 mg max.

4.4 Resistance to Synthetic PerspirationSolution (GMW14352 / GMI 60275 / GM9517P).Note:Test only for parts with direct contact toperspiration by hand on large scale, e.g. steeringwheel, cover airbag driver side etc.

Resistance to synthetic perspiration solution toGMW14352.

4.5 Resistance to Scratching and Mar(GMW14688 / GME 60280).

Note:Only for unpainted parts. No testing forungrained parts and for parts in non visible areas.Resistance to scratching to GMW14688 - A - 1.0

3 Test Preparation and Evaluation

3.1 Calibration.The test facilities and equipmentshall be in good working order and shall have avalid calibration label.

3.2 Equipment.Apparatus as required by theappropriate test method.

3.3 Test Vehicle/Test Piece. Unless otherwisespecified in the relevant test method for theproperty concerned, either the completecomponent or a section therefrom shall be usedfor test pieces. Unless otherwise specified in theappropriate test method at least one test pieceshall be tested.

3.4 Test Conditions.Test pieces shall not betested within 72 h of manufacture, if not otherwisespecified.

Unless otherwise specified, conditioning shall beas required by the appropriate test method. Fortests to paragraph 4.6 test pieces shall be testedin the as received condition (i.e. no specialpreconditioning).

3.5 Test Results.The test report shall have thesame subject titles and numbering as this testspecification.

© Copyright 2007 General Motors Corporation All Rights Reserved

March 2007Page 2 of 6

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说教育文库GMW14651_06MR07_Material Related Interior Plastic Part Perfo(2)在线全文阅读。

GMW14651_06MR07_Material Related Interior Plastic Part Perfo(2).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/jiaoyu/1210813.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: