77范文网 - 专业文章范例文档资料分享平台

GMW14651_06MR07_Material Related Interior Plastic Part Perfo(3)

来源:网络收集 时间:2021-04-05 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

GM WORLDWIDE ENGINEERING STANDARDS

4.6Environmental Cycling / Resistance toTemperature Cycling.Must comply toGMW14444 Environmental Cycling / Resistanceto Temperature Cycling.

4.7 Resistance to Odor (GMW3205).

Note:This test only shall be done on parts thatare in contact with refreshable air in the occupantcompartment and the trunk.

Resistance to odour to GMW3205, dry condition,requirement: Rating 6, with a test piece size asspecified below.

Additional for parts containing materials withnatural contents e.g. jute, sisal, hemp, flax,cellulose, wool, cotton etc.: Resistance to odor toGMW3205, wet condition, requirement: Rating6, with a test piece size as specified below.The size of the test pieces shall be governed bythe amount of the test material used in the vehicle,and shall be selected using the mass of the part inthe care and the test container volume accordingto the formula, where P is the mass of part in g, Vis the volume of test container in l and t is themass of test piece in g.

GMW14651

(e.g. FMVSS 302 for USA, documentation

required according to TRIAS 48 for Japan).Note:For painted or molded in color plastic partsthe data of the initial tested color can be used forother colors, if the burn rate is 50 mm/min for thetested color and if all of the following criteria arefulfilled:

material is natural or integrally colored plastic material is made of one layer (no laminate, no

composite, no cellular structure) same filler/additive package is used part has wall thickness of 2 mm

4.9 Impact Resistance.Must comply toGMW14444 Impact Resistance requirement.4.10 Oxidation Stability.

Note:Test only for parts made of Polypropylene(PP).

During the test the test pieces shall not be incontact with the metallic oven walls. The clampsfor fixing the test pieces shall not contain anycopper.

Test pieces shall be exposed in an air circulatingoven operating at (+150 ± 3) °C.Test duration:AB

PP parts with no natural content: (168 ± 2) hPP parts with natural contents: (336 ± 2) h

Natural contents are e.g. jute, sisal, hemp, flax,cellulose, wool, cotton etc.

No visible indication of local discoloration and/orbrittleness by material degradation.4.11 Interior Emissions (GMW8081).

Note:This test only shall be done on parts thatare in contact with refreshable air in the occupantcompartment and the trunk.

Relative Emission < 0.5 shall be met.

Additional procedures and requirements may bedefined by the approving region.4.12 Humidity Ageing.

Note:Only for development, not for initial sampleapprovals. Only for compact plastic parts made ofhygroscopic materials e.g. polyurethane (exceptfoam parts), polycarbonate, polyester like PBTand PET, thermoplastic polyester elastomers andall blends containing these materials. Not forplastic parts made from polypropylene orpolyamide.

Note: If for plastic parts made of POM the odorcriteria is not met, then it can be substituted by thefollowing test:

Formaldehyde Release according to GME 60271 - 10 µg/g.

4.8 Flammability.Must comply with MVSS 302.Test to GMW3232.

Note:In addition the materials and componentsshall meet the requirements according to therelevant legislations and regulations of thecountries to which they are supplied

© Copyright 2007 General Motors Corporation All Rights Reserved

March 2007Page 3 of 6

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说教育文库GMW14651_06MR07_Material Related Interior Plastic Part Perfo(3)在线全文阅读。

GMW14651_06MR07_Material Related Interior Plastic Part Perfo(3).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/jiaoyu/1210813.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: