计算机网络技术路由器操作实验报告.(2)

Ruijie(config#show run Building configuration... Current configuration:561bytes !

version RGOS10.3(5b3,Release(105163(Wed Dec2217:50:52CST2010 -ngcf67 !

no service password-encryption !

interface Serial1/0 clock rate64000 !

interface FastEthernet0/0

ip address192.168.0.1255.255.255.0 duplex auto speed auto !

interface FastEthernet0/1 ip address172.16.0.2255.255.255.0 duplex auto

speed auto !

ip route10.0.0.0255.255.255.0172.16.0.1 !

ref parameter50400 line con0 line vty04 login ! end

Ruijie(config#int e00:00:54:13:%LINK-3-UPDOWN:Interface FastEthernet 0/0,cha nged state to up.

00:00:54:13:%LINEPROTO-5-UPDOWN:Line protocol on Interface FastEthernet0/0,c

hanged state to up. %Incomplete command. Ruijie(config#

Ruijie CON0is now available Press RETURN to get started

00:01:04:19:%SYS-5-CONFIG_I:Configured from console by console Ping

6、对R2的路由器的e0/0进行ping命令操作

C:\\Documents and Settings\\Administrator>ping192.168.0.1 Pinging192.168.0.1with32bytes of data:

Reply from192.168.0.1:bytes=32time<1ms TTL=64 Reply from192.168.0.1:bytes=32time<1ms TTL=64 Reply from192.168.0.1:bytes=32time<1ms TTL=64 Reply from192.168.0.1:bytes=32time<1ms TTL=64 Ping statistics for192.168.0.1:

Packets:Sent=4,Received=4,Lost=0(0%loss, Approximate round trip times in milli-seconds: Minimum=0ms,Maximum=0ms,Average=0ms 能够ping通,说明本地计算机与路由器R2已经连通!

三、计算机PC4通过路由器R1和路由器R2对计算机PC1进行ping命令操作 用IP为10.0.0.8与192.168.0.165的计算机进行ping命令操作 C:\\Documents and Settings\\Administrator>ping192.168.0.165 Pinging192.168.0.165with32bytes of data:

Reply from192.168.0.165:bytes=32time=1ms TTL=126

Reply from192.168.0.165:bytes=32time=1ms TTL=126 Reply from192.168.0.165:bytes=32time=1ms TTL=126 Reply from192.168.0.165:bytes=32time=1ms TTL=126 Ping statistics for192.168.0.165:

Packets:Sent=4,Received=4,Lost=0(0%loss, Approximate round trip times in milli-seconds: Minimum=1ms,Maximum=1ms,Average=1ms 能够ping通,实验成功!

四、计算机PC1通过路由器R2和路由器R1对计算机PC4进行ping命令操作用IP为192.168.0.165与10.0.0.8的计算机进行ping命令操作

C:\\Documents and Settings\\Administrator>ping10.0.0.8 Pinging10.0.0.8with32bytes of data:

Reply from10.0.0.8:bytes=32time=1ms TTL=126 Reply from10.0.0.8:bytes=32time=1ms TTL=126 Reply from10.0.0.8:bytes=32time=1ms TTL=126 Reply from10.0.0.8:bytes=32time=1ms TTL=126 Ping statistics for10.0.0.8:

Packets:Sent=4,Received=4,Lost=0(0%loss, Approximate round trip times in milli-seconds:

Minimum=1ms,Maximum=1ms,Average=1ms 能够ping通,实验成功! 实验结果:

本实验通过配置计算机最近路由器的e0/0和e0/1的路由地址和相邻路由器的路由表,将两端的电脑连接起来,最终能够通信。

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库计算机网络技术路由器操作实验报告.(2)在线全文阅读。