计算机网络技术路由器操作实验报告.

计算机网络技术路由器操作实验

实验目的:通过两个配置路由器将路由器两端的电脑连接 实验条件:

路由器*2、PC机*5、网线若干 路由器R1端口:PC4:端口22; IP:10.0.0.8 PC5:端口23 IP:10.0.0.7

路由器R2端口:PC1:端口20 IP:192.168.0.165 PC2:端口21 IP:192.168.0.166 PC3:端口24 IP:192.168.0.163 实验过程:

一、对R1路由器操作 1、进入全局模式: Ruijie>enable

Ruijie#configure terminal

Enter configuration commands,one per line.End with CNTL/Z. 2、给本地路由器R1e0/0端口配置地址 Ruijie(config#interface fastethernet0/0

Ruijie(config-if-FastEthernet0/0#ip addre10.0.0.1255.255.255.0 3、给本地路由器R1e0/1端口配置地址

Ruijie(config#interface fastethernet0/1

Ruijie(config-if-FastEthernet0/1#ip address172.16.0.1255.255.255.0 4、PC4配置路由器R1与R2连通路由器表

Ruijie(config#ip route192.168.0.0255.255.255.0172.16.0.2 5、显示配置

Ruijie(config#show run Building configuration... Current configuration:561bytes !

version RGOS10.3(5b3,Release(105163(Wed Dec2217:50:52CST2010 -ngcf67 !

no service password-encryption !

interface Serial1/0

clock rate64000 !

interface FastEthernet0/0 ip address10.0.0.1255.255.255.0 duplex auto speed auto !

interface FastEthernet0/1 ip address172.16.0.1255.255.255.0 duplex auto speed auto !

ip route192.168.0.0255.255.255.0172.16.0.2 !

ref parameter50400 line con0 line vty04 login !

end

Ruijie(config#int e00:00:54:13:%LINK-3-UPDOWN:Interface FastEthernet 0/0,cha nged state to up.

00:00:54:13:%LINEPROTO-5-UPDOWN:Line protocol on Interface FastEthernet0/0,c

hanged state to up. %Incomplete command. Ruijie(config#

Ruijie CON0is now available Press RETURN to get started

00:01:04:19:%SYS-5-CONFIG_I:Configured from console by console Ping

6、对R1的路由器的e0/0端口进行ping命令操作 C:\\Documents and Settings\\Administrator>ping10.0.0.1 Pinging10.0.0.1with32bytes of data:

Reply from10.0.0.1:bytes=32time<1ms TTL=64 Reply from10.0.0.1:bytes=32time<1ms TTL=64 Reply from10.0.0.1:bytes=32time<1ms TTL=64 Reply from10.0.0.1:bytes=32time<1ms TTL=64

Ping statistics for10.0.0.1:

Packets:Sent=4,Received=4,Lost=0(0%loss, Approximate round trip times in milli-seconds: Minimum=0ms,Maximum=0ms,Average=0ms 能够ping通,说明本地计算机与路由器R1已经连通! 二、对R2路由器操作 1、进入全局模式: Ruijie>enable

Ruijie#configure terminal

Enter configuration commands,one per line.End with CNTL/Z. 2、给本地路由器R2e0/0端口配置地址 Ruijie(config#interface fastethernet0/0

Ruijie(config-if-FastEthernet0/0#ip addre192.168.0.1255.255.255.0 3、给本地路由器R2e0/1端口配置地址

Ruijie(config#interface fastethernet0/1

Ruijie(config-if-FastEthernet0/1#ip address172.16.0.2255.255.255.0 4、PC1配置路由器R2与R1连通路由器表

Ruijie(config#ip route10.0.0.0255.255.255.0172.16.0.1 5、显示配置

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库计算机网络技术路由器操作实验报告.在线全文阅读。