7
PWM control of brightness is the preferred method of many high brightness LED manufacturers. This is because the LED maintains its colour signature over the complete dimming range. This is particularly important in RGB colour mixing applications. It is more difficult to implement, but generally the dimming is more pleasing and the technique lends itself to microcontroller interfacing.
PWM dimming is generally applied at low frequencies that are above eye flicker perception of 100Hz. The designer must consider though whether the illumination is going to be subject to movement, as stroboscopic effects may occur requiring a faster PWM frequency to be used. This is a consideration for moving vehicle illumination or even flashlights. If the PWM dimming is used in conjunction with a switching regulator, the technique generally is used to chop the LED current. This will put a further modulation on the EMI signature which may make the EMI worse. It may also make it better as it is effectively doing the same as dithering the switching frequency. Thus reducing the quasi peak EMI signal.
There is an audible consideration too. The higher the PWM frequency the higher is the possibility of switching regulator inductor ringing at the PWM dimming frequency. This would be more noticeable at 1kHz than 100Hz partly due to the poor base response of the inductor and the frequency response of the ear.
Despite all this, PWM dimming still offers a better brightness control. Linear control is simpler to implement from an analogue point of view but not from a digital standpoint. You may need to consider the logarithmic response of the eye to brightness change. This may require the use of logarithmic potentiometers to produce apparent linear brightness control.
© 2006 Zetex Semiconductors plc
百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说教育文库thermal_considerations_for_high_brightness_LEDs_5(6)在线全文阅读。
相关推荐: