77范文网 - 专业文章范例文档资料分享平台

SH3501-2002 石油化工有毒可燃介质管道工程施工及验收规范双语版

来源:网络收集 时间:2019-02-15 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

备案号:J249-2003

SH

中华人民共和国石油化工行业标准 Standard for Petrochemical Industry of PRC

SH 3501-2002

代替SH 3501-2001

SH 3501-2002

A substitute version of SH 3501-2001

石油化工有毒、可燃介质管道

工程施工及验收规范

Specification for construction and acceptance of hypertoxic and combustible medium piping engineering in petrochemical industry

Chinese language is the \the Chinese version takes precedence and the Chinese version is the legally binding version. 原本以中文书就,如果英文和中文版本之间存在不一致,以中文版本为准,中文版本具有法律约束力。

2003-02-09 发布 2003-05-01 实施

国家经济贸易委员会

1

发布 SH 3501-2002

Issued on Feb. 9, 2003 Implemented on May 1, 2003

Issued by State Economy & Trade Commission 2

SH 3501-2002

目 次

List of Contents

前言……………………………………………………………………………………………

Foreword 1 2 3 4 5 5.1 5.2 5.3 5.4 6 6.1 6.2 7 7.1 7.2 7.3

范围……………………………………………………………………………………

Scope

规范性引用文件………………………………………………………………………

Normative documents quoted

总则……………………………………………………………………………………

General

管道分级………………………………………………………………………………

Pipeline grading

管道组成件检验………………………………………………………………………

Inspection of constituent elements of pipeline

一般规定………………………………………………………………………………

General specifications

管子检验………………………………………………………………………………

Inspection of pipe

阀门检验………………………………………………………………………………

Inspection of valve

其他管道组成件检验…………………………………………………………………

Inspection of constituent elements of other pipes

管道预制及安装………………………………………………………………………

Prefabrication and installation of pipeline

管道预制………………………………………………………………………………

Prefabrication of pipeline

管道安装………………………………………………………………………………

Installation of pipeline

管道焊接………………………………………………………………………………

Welding of pipeline

一般规定………………………………………………………………………………

General specifications

焊前准备与接头组对…………………………………………………………………

Preparation and assembly of joints

焊接工艺要求…………………………………………………………………………

Requirement for welding procedure

1

SH 3501-2002

7.4 7.5 8 8.1 8.2 8.3 9

预热与热处理…………………………………………………………………………

Preheating and heat treatment

质量检验………………………………………………………………………………

Quality inspection

管道系统试验…………………………………………………………………………

Test for piping system

管道系统压力试验……………………………………………………………………

Pressure test for piping system

管道系统吹扫…………………………………………………………………………

Sweeping for piping system

气体泄漏性试验及真空度试验………………………………………………………

Gas leakage test and test of vacuum degree

交工文件………………………………………………………………………………

Handover document

附录A(资料性附录)常用有毒介质、可燃介质……………………………………… Appendix A (Data Appendix) Common Hypertoxic and Combustible Medium

附录B(资料性附录)焊接接头坡口形式及组对要求……………………………………

Appendix B(Data Appendix) Type of Groove of Weld Joint and Requirements for Assembly 附:条文说明…………………………………………………………………………………

Explanation to Clauses

2

SH 3501-2002

前 言

Foreword

本规范是根据国经贸厅行业[2002]36号文的通知,由中国石化集团第五建设公司对《石油化工剧毒、可燃介质管道工程施工及验收规范》SH 3501-2001进行修订而成。

The Specification is the revision of Specification for Construction and Acceptance of Hypertoxic and Combustible Medium Piping Engineering in Petrochemical Industry SH3501-2001 revised by The Fifth Construction Company of the China Petrochemical Corporation according to File [2002]36 issued by State Economy & Trade Commission.

本规范共分9章和2个资料性附录。本规范与SH 3501-2001《石油化工剧毒、可燃介质管道工程施工及验收规范》相比,主要变化如下:

The Specification contains 9 chapters and 2 data appendixes. The main changes of the Specification comparing with original SH3501-2001 Specification for Construction and Acceptance of Hypertoxic and Combustible Medium Piping Engineering in Petrochemical Industry are:

-适用范围扩大至毒性程度为中度危害和轻度危害介质;

-调整了管道分级规定,与SH 3509-2001《石油化工管道设计器材选用通则》协调一致; -将有关内容与GB 50235-97《工业金属管道工程施工及验收规范》进行了协调; -修改了原规范中管道组成件检验、试验的有关规定;

-完善了焊接接头检验方面的有关规定。

----Scope of application is enlarged. Toxic level includes moderate hazard and negligible hazard. ----Specification for pipeline grading is regulated to comply with General Rule for Pipeline Design and Selection in Petrochemical Industry.

----Specification for inspection and test of constituent elements of pipeline is modified. ----Perfect specification for inspection of weld joint.

本规范以黑体字标志的条文为强制性条文,必要严格执行。

Boldfaces in the Specification are mandatory clauses and must be strictly implemented.

本规范由中国石化集团施工规范管理站淄博分站管理,由中国石化集团第五建设公司负责解释。

The Specification is managed by Zibo Branch of Construction Specification Management Station of China Petrochemical Corporation, and interpreted by The Fifth Construction Company of the China Petrochemical Corporation.

本规范在实施过程中,如发现需要修改补充之处,请将意见和有关资料提供给我们,以便今后修订时参考。

In case any repair and supplement are found necessary during implementation of the Specification, please send the suggestion together with relevant information to us for reference during future update.

1

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说综合文库SH3501-2002 石油化工有毒可燃介质管道工程施工及验收规范双语版在线全文阅读。

SH3501-2002 石油化工有毒可燃介质管道工程施工及验收规范双语版.doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/zonghe/466501.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: