77范文网 - 专业文章范例文档资料分享平台

BK9053-倍福耦合器说明书(中文版)

来源:网络收集 时间:2021-09-24 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

Foreword 前言

Notes on the documentation 文件注释

Notes on the documentation文件注释

Disclaimer免责声明

The documentation has been prepared with care. The products described are, however, constantly under development. 该文件已经精心准备。然而,描述的产品,不断地开发之中。

For that reason the documentation is not in every case checked for consistency with performance data, standards or other characteristics.

In the event that it contains technical or editorial errors, we retain the right to make alterations at any time and without warning.

No claims for the modification of products that have already been supplied may be made on the basis of the data, diagrams and descriptions in this documentation.

Trademarks商标

Beckhoff, TwinCAT, EtherCAT, Safety over EtherCAT, TwinSAFE and XFC are registered trademarks of and licensed by Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

®

®

®

®

®

®

Patent Pending专利申请中

The EtherCAT Technology is covered, including but not limited to the following patent applications and patents:

EP1590927, EP1789857, DE102004044764, DE102007017835

with corresponding applications or registrations in various other countries.

The TwinCAT Technology is covered, including but not limited to the following patent applications and patents:

EP0851348, US6167425 with corresponding applications or registrations in various other countries.

Copyright版权

© Beckhoff Automation GmbH.

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization are prohibited.

Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.

Safety instructions安全须知

Safety instructions安全须知

Safety rules安全须知

Consider the following safety instructions and descriptions!

Product specific safety instructions are to be found on the following pages or in the areas mounting, wiring, commissioning etc.

Disclaimer免责声明

All the components are supplied in particular hardware and software configurations appropriate for the application. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH.

Personnel qualification人员资质

This description is only intended for the use of trained specialists in control, automation and drive engineering who are familiar with the applicable national standards.

Description of symbols符号的说明

The following symbols with a adjoining safety advise or notice are used in this documentation. You have to read the safety advices carefully and adhere them strictly!

Documentation issue status

Documentation issue status文档问题状态

Firm and hardware version企业和硬件版本

Documentation

BK9053

BK9103

Version

Firmware Hardware* Firmware Hardware*

1.3.1 B5 00 BD 06

1.3.0 B2 00 BA

06

1.2.0 B1 00 B7 06

1.1.0 - - B2 00

1.0.0 - - B0 00

Hardware* Version witch is minimum necessary to update the coupler硬件*版本是最低限度的必要更新耦合器

Witch firmware is on the Bus Coupler in delivery state is recognizable from the sticker under the coupler (see fifth and sixth digit of the production number). 固件是在出厂状态总线耦合器是由耦合器下的标签识别(见的生产序号第五和第六位)。 Example: 示例: 3200B2020000

The firmware of the example is B2. 该实施例的固件为B2。

For updating your firmware you need KS2000 configuration software and the serial cable that belongs to the shipment of this software. 对于更新固件,你需要KS2000组态软件,并属于该软件的出厂串行电缆。 From firmware version B6 you can also update your BK9103 via the TwinCAT System Manager. New firmware versions may be found on . 从固件版本B6还可以更新通过TwinCAT系统管理器的BK9103。

新固件版本可以在找到。

Notes about the firmware versions关于固件版本的注意事项

BK9053

Product overview

BK9053 - Introduction

BK9053 - Introduction BK9053 - 简介

PROFINET is the open Industrial Ethernet standard of the PNO (PROFIBUS User Organization). Internationally established IT standards are used for communication.

PROFINET是由PNO(PROFIBUS用户组织)针对开放式工业以太网标准。在国际上建立的IT标准用于通信。

PROFINET IO describes the data exchange between controllers and field devices and can be used in standard Ethernet networks. Commercial switches are used for networking purposes. Linking to any PROFINET controller takes place via the GSDML basic device file.

PROFINET IO描述控制器和现场设备之间的数据交换,并且可以在标准的以太网网络中使用。商用交换机是用于联网的目的。链接到任何PROFINET控制器通过GSDML基本的设备文件发生。

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说医药卫生BK9053-倍福耦合器说明书(中文版)在线全文阅读。

BK9053-倍福耦合器说明书(中文版).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/yiyao/1255628.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: