It has a 4 A 250V external fast fuse (F).
Inputs-Outputs.
All the digital inputs and outputs have galvanic isolation via optocouplers between the CNC circuitryand the outside.
CNC 8055CNC 8055i
·15·
8055 power FL-M的最新操作手册
PRECAUTIONS DURING REPAIR
snoitidnoc ytefaS
CNC 8055
CNC 8055i
·16· Do not open this unit. Only personnel authorized by Fagor Automation may open this unit. Do not handle the connectors with the unit connected to mains. Before manipulating the connectors(inputs/outputs, feedback, etc.) make sure that the unit is not connected to AC power.SAFETY SYMBOLS Symbols which may appear on the manual.Symbol for danger or prohibition.It indicates actions or operations that may cause damage to people or to units.Warning symbol.It indicates situations that may be caused by certain operations and the actions to be taken to preventthem.Obligation symbol.It indicates actions and operations that must be carried rmation symbol.
It indicates notes, warnings and advises.
8055 power FL-M的最新操作手册
WARRANTY TERMS
INITIAL WARRANTY
All products manufactured or marketed by FAGOR carry a 12-month warranty for the end user which couldbe controlled by the our service network by means of the warranty control system established by FAGORfor this purpose.
In order to prevent the possibility of having the time period from the time a product leaves our warehouseuntil the end user actually receives it run against this 12-month warranty, FAGOR has set up a warrantycontrol system based on having the manufacturer or agent inform FAGOR of the destination, identificationand on-machine installation date, by filling out the document accompanying each FAGOR product in thewarranty envelope. This system, besides assuring a full year of warranty to the end user, enables our servicenetwork to know about FAGOR equipment coming from other countries into their area of responsibility.The warranty starting date will be the one appearing as the installation date on the above mentioneddocument. FAGOR offers the manufacturer or agent 12 months to sell and install the product. This meansthat the warranty starting date may be up to one year after the product has left our warehouse so long asthe warranty control sheet has been sent back to us. This translates into the extension of warranty periodto two years since the product left our warehouse. If this sheet has not been sent to us, the warranty periodends 15 months from when the product left our warehouse.
This warranty covers all costs of material and labour involved in repairs at FAGOR carried out to correctmalfunctions in the equipment. FAGOR undertakes to repair or replace their products within the period fromthe moment manufacture begins until 8 years after the date on which it disappears from the catalogue.FAGOR has exclusive competence in deciding whether the repair enters within the term defined as thewarranty period.
EXCLUDING CLAUSES
Repairs will be carried out on our premises. Therefore, all expenses incurred as a result of trips made bytechnical personnel to carry out equipment repairs, despite these being within the above-mentioned periodof warranty, are not covered by the warranty.
Said warranty will be applied whenever the equipment has been installed in accordance with instructions,has not be mistreated, has not been damaged by accident or by negligence and has not been tamperedwith by personnel not authorised by FAGOR. If, once servicing or repairs have been made, the cause ofthe malfunction cannot be attributed to said elements, the customer is obliged to cover the expensesincurred, in accordance with the tariffs in force.
Other warranties, implicit or explicit, are not covered and FAGOR AUTOMATION cannot be held responsiblefor other damages which may C 8055CNC 8055i
·17·
8055 power FL-M的最新操作手册
WARRANTY ON REPAIRS
In a similar way to the initial warranty, FAGOR offers a warranty on standard repairs according to thefollowing conditions:
PERIOD
CONCEPT
EXCLUDING CLAUSES12 months.Covers parts and labor for repairs (or replacements) at the network's ownfacilities.The same as those applied regarding the chapter on initial warranty.
If the repair is carried out within the warranty period, the warranty extension
has no effect.
Warranty termsWhen the customer does not choose the standard repair and just the faulty material has been replaced,
the warranty will cover just the replaced parts or components within 12 months.For sold parts the warranty is 12 moths length.
MAINTENANCE CONTRACTS
The SERVICE CONTRACT is available for the distributor or manufacturer who buys and installs our C 8055
CNC 8055i
·18·
8055 power FL-M的最新操作手册
MATERIAL RETURNING TERMS
When sending the central nit or the remote modules, pack them in its original package and packagingmaterial. If the original packaging material is not available, pack it as follows:
百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说医药卫生8055 power FL-M的最新操作手册_1110(6)在线全文阅读。
相关推荐: