河南机电高等专科学校
毕业设计说明书(论文)
论文题目:送丝机机头手动调节机构设计
系 部: 机械工程系
专 业: 机械制造及自动化
班 级: 机制091
学生姓名:
学 号:
指导教师: 司 忠 志
2012年 5 月 8 日
摘 要
焊接是一个局部的迅速加热和冷却过程,焊接区由于受到四周工件本体的拘束而不能自由膨胀和收缩,冷却后在焊件中便产生焊接应力和变形。重要产品焊后都需要消除焊接应力,矫正焊接变形。
现代焊接技术已能焊出无内外缺陷的、机械性能等于甚至高于被连接体的焊缝。被焊接体在空间的相互位置称为焊接接头,接头处的强度除受焊缝质量影响外,还与其几何形状、尺寸、受力情况和工作条件等有关。接头的基本形式有对接、搭接、丁字接(正交接)和角接等。
未来的焊接工艺,一方面要研制新的焊接方法、焊接设备和焊接材料,以进一步提高焊接质量和安全可靠性,如改进现有电弧、等离子弧、电子束、激光等焊接能源;运用电子技术和控制技术,改善电弧的工艺性能,研制可靠轻巧的电弧跟踪方法。
关键词:送丝机 水平调节机构 蜗轮蜗杆 标准件
ABSTRACT
Welding is a local rapid heating and cooling process, the welding zone due to the surrounding workpiece body restraint and not free expansion and contraction, after cooling to the welding pieces will produce the welding stress and deformation.
Important products after welding to eliminate welding stress, welding distortion.
Modern welding technology has been able to weld without external defect,
mechanical properties equal to or greater than the connected body weld. Welded body in the space of the mutual position known as the welding joint, joint strength in weld quality influence, but also its shape, size, stress and the working condition of the. The basic form of butt joint, lap, tee joint (positive transfer ) and the angle joint etc..
The future of welding process, one should develop new welding method, welding equipment and welding materials, to further improve the welding quality and reliability, such as improving the existing arc, plasma arc, electron beam welding, laser energy; the
use of electronic technology and control technology, improve arc process performance, developing reliable lightweight arc tracking method of.
Key Words:Wire feeding machine Level adjusting mechanism
Worm gear Standard parts
目 录
摘要……………………………………………………………………………..…..…. 绪论……………………………………………………………….….………………. 1
第1章 设计目的和要求………………………………………….….………….….4
1.1 设计目的…………………………………………………………………………4
1.2 设计要求........……………………….……………………………..…………….4
第2章 机构作用与整体分析………………..….…… ………………………........5
2.1 机构作用………………………………………………….……………………...5
2.2 整体分析…………………………….…………………………...……………....5
第3章 水平十字调整架的设计…………………………………………….…….7
3.1 零件设计用考虑的问题……………………………………………………..…7
3.2 水平十字调整架的作用……………………………………………………..…7
3.3 水平十字调整架的工艺分析……………………………………………..……7
3.4 水平十字调整架毛坯材料的制造形式及热处理………………………………7
3.5 水平十字调整架的结构确定……………………………………………….….8
第4章 弯板的结构设计……………………………………………….…………10
4.1 弯板的作用…………………………………………………………………….10
4.2 弯板的工艺分析……………………………………………………………….10
4.3 弯板毛坯材料的制造形式及热处理…………………………………….……10
4.4 弯板的结构确定…………………………………………………………….…11
第5章 垂直十字调整架的设计……………………………………….………..12
5.1 垂直十字调整架的作用…………………………………………………….…12
5.2 垂直十字调整架的工艺分析……………………………………………….…12
5.3 垂直十字调整架毛坯材料的制造形式及热处理……………………….……12
5.4 垂直十字调整架的结构确定………………………………………………….13
第6章 蜗轮蜗杆传动机构的结构设计………………………………………...15
6.1 齿轮传动的设计准则……………………………………………………….…15
6.2 齿轮常用材料及热处理方法…………………………………………….……15
6.3 该蜗轮蜗杆机构的材料选择及热处理……………………………….………16
6.4 蜗轮蜗杆的作用…………………………………………………………….…16
6.5 蜗轮蜗杆的尺寸确定…………………………………………………….……16
6.6 蜗轮蜗杆支架的设计…………………………………………………….……16
第7章 其它结构的设计………………………………….……………………..18
7.1 调节丝杠的设计…………………………………………………………….…18
7.2 连接板的设计…………………………………………………………….……19
第8章 标准件及常用件的选择………………………………………………….20
8.1 滚动轴承的组合设计………………………………………………………….20
百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说医药卫生毕业设计说明书(论文)格式及要求在线全文阅读。
相关推荐: