77范文网 - 专业文章范例文档资料分享平台

The Finite Element Analysis of Connecting Rod of Diesel Engi(2)

来源:网络收集 时间:2021-02-21 下载这篇文档 手机版
说明:文章内容仅供预览,部分内容可能不全,需要完整文档或者需要复制内容,请下载word后使用。下载word有问题请添加微信号:或QQ: 处理(尽可能给您提供完整文档),感谢您的支持与谅解。点击这里给我发消息

柴油机连杆的有限元分析 英文资料

The solution of (4) is the eigenvalue ,and ωithe square root ωiis the circumferential rate(rad/s). So the inherent frequencies can be solved.

fi=ωi/(2π) (5)

B. Modal analysis of the connecting rod

As the structure of the connecting rod is very complex, generally it was separately made. Because of the separate of the connecting rod shaft and the connecting rod cap, many components such as connecting rod buses, connecting rod bearing shells, and connecting rod bolts. In order to conveniently analyze the connecting rod, without affecting the calculate accuracy, some parts of the connecting rod and the connecting rod shaft were integrated to simplify the link mechanism.

Make the simplified connecting rod 3D model scatter with the Hyperworks software, and divided it into 7636

nodes, 28866 units.

Figure 2. The finite element model of the connecting rod

2

III. THE ANALYSIS RESULT OF THE MODAL

ANALYZE OF THE CONNECTING ROD According to the actual situation, all the points of the inner eye were coupled to a point which was created in the center of the inner connecting rod top end eye with the HyperWorks. And all the points of the inner connecting rod button end eye were coupled to the points created in the center of the inner connecting rod button end eye. The generated document with a suffix of “dat” was run in Nastran to get the modal of the connecting rod flexible-body model. Then the generated document with a suffix of “op2”was run in the HyperWorks, and HyperWorks and Nastran were connected. In the end, the modal of the connecting rod was analyzed with the HyperWorks, the early 10-order oscillating frequency and shapes were got as follow:

TABLE 2 : THE FREE OSCILLATING FREQUENCY OF THE CONNECTING ROD

(a) Piston (b) Connecting rod

Number

1 2

Frequency(Hz)

1211 1636 1700 3550 4695

Number 6 7 8 9 10

Frequency(Hz)

5328 6782 6881 8370 9422

3 4 5

(c) Crankshaft and flywheel (d) Crank link mechanism

Figure 1. 3D model of the Crank link mechanism

TABLE 1: THE CHARACTERISTIC OF THE CONNECTING ROD MATERIAL

Material Steel 45 Modulus of elasticity

Poisson's ratio

2E11 0.3

Figure 3. the first and the second orders oscillating shapes of the

connecting rod

Density 8050 Yield limit

σS

355MPa

Figure 4. the third and the fourth orders oscillating shapes of the

connecting rod

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读,免费范文网,提供经典小说教育文库The Finite Element Analysis of Connecting Rod of Diesel Engi(2)在线全文阅读。

The Finite Element Analysis of Connecting Rod of Diesel Engi(2).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印 下载失败或者文档不完整,请联系客服人员解决!
本文链接:https://www.77cn.com.cn/wenku/jiaoyu/1186363.html(转载请注明文章来源)
Copyright © 2008-2022 免费范文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ: 邮箱:tiandhx2@hotmail.com
苏ICP备16052595号-18
× 注册会员免费下载(下载后可以自由复制和排版)
注册会员下载
全站内容免费自由复制
注册会员下载
全站内容免费自由复制
注:下载文档有可能“只有目录或者内容不全”等情况,请下载之前注意辨别,如果您已付费且无法下载或内容有问题,请联系我们协助你处理。
微信: QQ: