雷尼绍探针头程序

O8810 (WEB MEAS.) (TOOL CHOICE)

M19 (SPINDLE ORIENTATION)

G90 G80 G40 G0 (PREPARATORY CODE) G59 X0. Y0.

G43 H20 Z50. (ACTIVATE OFFSET TO 100MM ABOVE) G65 P9014 Z-8. F1000 (PROTECTED MOVE) G65 P9010 X365. S1. (WEB MEAS.) G65 P9014 X-30. F3000 G65 P9010 Y255. S1. G65 P9014 Z100. F3000 (REFERENCE RETURN) (CANCEL OFFSET) M99 (PROGRAM END)

O9010 (REN WEB PKT) G90 G80 G40 M98 P9724 #9=#109 #1=#5041 #2=#5042 #15=#5021 #16=#5022 #118=#0

IF[#24 EQ #0] GOTO3 IF[#25 NE #0] GOTO16 #7=#24 #4=#500

IF[#26 EQ #0] GOTO2 IF[#18 NE #0] GOTO1 #18=5.0*#9

N1 #118=#24/2+#4+#18

N2 G65 P9705 D[#24] Q[#17] Z[#26] F[#9] GOTO6

N3 IF[#25 EQ #0] GOTO16 #7=#25 #4=#502

IF[#26 EQ #0] GOTO5 IF[#18 NE #0] GOTO4 #18=5.0*#9

N4 #118=#25/2+#4+#18

N5 G65 P9704 D[#25] Q[#17] Z[#26] F[#9] N6 IF[#145 NE 0.0] GOTO17 IF[#26 EQ #0] GOTO7

#3=#131-#130-#4*2 #6=#3-#7 GOTO8

N7 #3=#131-#130+#4*2 #6=#7-#3

N8 IF[#22 EQ #0] GOTO9

G65 P9730 M[#13] V[#22] D[#7] H[#11] E[#6] N9 IF[#13 EQ #0] GOTO10 #[2000.0+#13]=#6

N10 IF[#19 EQ #0] GOTO14 IF[#19 NE 0] GOTO11 IF[#24 EQ #0] GOTO12

#2500=#2500+[#132+#504-#1] GOTO14

N11 IF[#24 EQ #0] GOTO12

#[#105]=[#15-#1]+[#132+#504-#1]-#2500 GOTO14

N12 IF[#19 NE 0] GOTO13

#2600=#2600+[#133+#505-#2] GOTO14

N13 #[#106]=[#16-#2]+[#133+#505-#2]-#2600 N14 IF[#20 EQ #0] GOTO15 G65 P9732 T#20 C[#6/2] IF[#26 NE #0] GOTO15 IF[#104 LT [#7/2]] GOTO15 G0 X#1 Y#2

#3000=96 (DIA OFFSET TOO LARGE) N15 IF[#11 EQ #0] GOTO19

IF[ABS[#6] LT ABS[#11]] GOTO19 G0 X#1 Y#2

#3000=90 (OUT OF TOLERANCE) N16 #3000=91 (FORMAT ERROR) N17 G0 X#1 Y#2

IF[#145 EQ 2.0] GOTO18 #3000=92 (PROBE OPEN) N18 #3000=93 (PROBE FAIL) N19 G0 X#1 Y#2 M99

O9014 (REN PROTECTED POSN) G90 G80 G40 M98 P9724 M98 P9723

IF[#4111 NE 0] GOTO1

#3000=89 (NO TOOL LENGTH) N1 IF[#9 NE #0] GOTO3 IF[#102 NE #0] GOTO2

#3000=88 (NO FEED RATE) N2 #9=#102 N3 #102=#9

N4 G31 X#24 Y#25 Z#26 F#9 M98 P9723

IF[#24 EQ #0] GOTO5

IF[ABS[#5041-#24] GE #103] GOTO7 N5 IF[#25 EQ #0] GOTO6

IF[ABS[#5042-#25] GE #103] GOTO7 N6 IF[#26 EQ #0] GOTO8

IF[ABS[[#5043-#5083]-#26] GE #103] GOTO7 GOTO8

N7 #3000=86 (PATH OBSTRUCTED) N8 M99

O9705 (REN X DIAM) G90 G80 G40 #1=#5041

#2=#5043-#5083 IF[#26 EQ #0] GOTO1

G31 X[#1-#118] F[5000*#9] M98 P9723

IF[ABS[#5061-[#1-#118]] GE #103] GOTO3 G31 Z[#26] F[3000*#9] M98 P9723

IF[ABS[[#5063-#5083]-#26] GE #103] GOTO3 N1 G65 P9721 X[#1-#7/2] Q[#17] F[#9] G0 Z#2 X#1

IF[#145 NE 0.0] GOTO4 #130=#5061

IF[#26 EQ #0] GOTO2

G31 X[#1+#118] F[5000*#9] M98 P9723

IF[ABS[#5061-[#1+#118]] GE #103] GOTO3 G31 Z#26 F[3000*#9] M98 P9723

IF[ABS[[#5063-#5083]-#26] GE #103] GOTO3 N2 G65 P9721 X[#1+#7/2] Q[#17] F[#9] G0 Z#2

IF[#145 NE 0.0] GOTO4

#131=#5061

#132=[#131+#130]/2 GOTO4

N3 #145=1.0 N4 G0 Z#2 G0 X#1 M99

O9721(REN X MOVE) G90 G80 G40 #145=0 #1=#5041

IF[#17 NE #0] GOTO1 #17=10.0*#9 N1 #4=10.0*#9

IF[#1 LE #24] GOTO2 #17=-#17 #4=-10.0*#9 N2 #4=#4*#506

G31 X[#24+#17] F[2500*#9] M98 P9723

IF[ABS[#5061-[#24+#17]] LT #103] GOTO4 IF[ABS[#5061-#1] LT #103] GOTO3 #3=#5061

G1 X[#3-#4] F[5000*#9] M98 P9723 #3004=2

G31 X[#24+#17] F[30*#9] M98 P9723

IF[ABS[#5061-[#24+#17]] LT #103] GOTO4 IF[ABS[#5061-[#3-#4]] LT #103] GOTO3 GOTO5

N3 #145=1.0 GOTO5

N4 #145=2.0 N5 G0 X#1 #3004=0 M99

O9723 (REN PC DELAY) #3001=0.0

WHILE[#3001 LE 140] DO1 END1 M99

O9724 (REN INCH MET) #109=1.0 #103=.050

IF[#4006 NE 20] GOTO1 #103=.002 #109=0.04

N1 IF[#4006 NE 70] GOTO2 #103=.002 #109=0.04

N2 IF[#506 LE 0] GOTO3 IF[#506 GT 1.] GOTO3 GOTO4 N3 #506=.5

N4 IF[#19 EQ #0] GOTO5 #105=2500+#19 #106=2600+#19 #107=2700+#19

IF[#19 LT 100] GOTO5

#105=6981+[20*[#19-100]] #106=6982+[20*[#19-100]] #107=6983+[20*[#19-100]] N5 M99

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库雷尼绍探针头程序在线全文阅读。