DIRECTED RETRY THRESHOLD, INTERFERED CELL,
BACKGROUND INTERFERED CELL,
TARGET CELL OF DIRECT ACCESS TO DESIRED LAYER; 24、如果其中有多余或不正确的邻区，可删除：
ZEAD： 25、基站数据的修改
修改TRX参数：（频点，BCCH，TRX信令编号名称，TRX信令的时隙分配等等）
ZERM：
BTS IDENTIFICATION, BTS NAME,
TRANSCEIVER IDENTIFICATION,
TRX IDENTIFICATION WITH FREQUENCY: PREFERRED BCCH TRX, FREQUENCY,
BACKGROUND FREQUENCY, TRAINING SEQUENCE CODE,
BACKGROUND TRAINING SEQUENCE CODE, D-CHANNEL O&M LINK SET NUMBER, D-CHANNEL O&M LINK SET NAME, OPTIMUM RX LEVEL UPLINK, OPTIMUM RX LEVEL DOWNLINK,
BACKGROUND OPTIMUM RX LEVEL UPLINK, TRX FREQUENCY TYPE,
BACKGROUND TRX FREQUENCY TYPE, DIRECT ACCESS LEVEL,
BACKGROUND DIRECT ACCESS LEVEL, E-TRX TYPE,
TRX LINK LOCATION, O&M LINK LOCATION, TRX TELEPHONE NUMBER,
TRX HALF RATE SUPPORT, GPRS ENABLED TRX,
RTSL TYPE 0, RTSL TYPE 1, RTSL TYPE 2, RTSL TYPE 3, RTSL TYPE 4, RTSL TYPE 5, RTSL TYPE 6, RTSL TYPE 7;
26、修改BTS参数：（BTS编号，BTS名称，CI号，NCC，BCC，LAC，HOP，HSN1，HSN2等等）
ZEQE：
BTS IDENTIFICATION, BTS NAME : NEW BTS NAME, CELL IDENTITY,
NETWORK COLOUR CODE,
BACKGROUND NETWORK COLOUR CODE, BTS COLOUR CODE,
BACKGROUNDBTS COLOUR CODE, MOBILE COUNTRY CODE, MOBILE NETWORK CODE, LOCATION AREACODE, BTS HOPPING MODE,
BACKGROUND BTS HOPPING MODE, UNDERLAY BTS HOPPING MODE,
BACKGROUND UNDERLAY BTS HOPPING MODE, HOPPING SEQUENCE NUMBER 1,
BACKGROUND HOPPING SEQUENCE NUMBER 1, HOPPING SEQUENCE NUMBER 2,
BACKGROUND HOPPING SEQUENCE NUMBER 2, UNDERLAY HOPPING SEQUENCE NUMBER,
BACKGROUND UNDERLAY HOPPING SEQUENCE NUMBER ;
27、修改BCF参数：（BCF编号，基站设备类型，OMU信令名称，OMU信令的时隙分配等等）
ZEFM：
BCF IDENTIFICATION: SITE TYPE,
D-CHANNEL LINK SET NUMBER, D-CHANNEL LINK SET NAME, RX DIFFERENCE LIMIT,
IDENTIFICATION OF TEST EQUIPMENT, MASTER CLOCK TRX,
EXTERNAL SYNCHRONISATION SOURCE, BTS BATTERY BACKUP PROCEDURE, TRX SHUTDOWN TIMER, BCCH TRX SHUTDOWN TIMER,
TEXT ID OF THE OUTPUT FROM OUT1 TO OUT6;
28、修改基站其他相关数据：（MAL值，MO值，MS值等等）
ZEQA：
BTS IDENTIFICATION, BTS NAME :
MOBILE ALLOCATION FREQUENCY LIST, BACKGROUND MOBILE ALLOCATION FREQUENCY LIST,
UNDERLAY MOBILE ALLOCATION FREQUENCY LIST, BACKGROUND UNDERLAY
MOBILE ALLOCATION FREQUENCY LIST, MAIO OFFSET,
BACKGROUND MAIO OFFSET, UNDERLAY MAIO OFFSET,
BACKGROUND UNDERLAY MAIO OFFSET, MAIO STEP,
BACKGROUND MAIO STEP,
UNDERLAY MAIO STEP, BACKGROUND UNDERLAY MAIO STEP ;
三、基站数据的删除
1、锁闭OMU信令：
ZDTC：OMU信令名称 2、锁闭TRX信令：
ZDTC：TRX信令名称 3、锁闭BCF：
ZEFS：BCF编号 4、锁闭BTS：
ZEQS：BTS编号 5、锁闭TRX：
ZERS：TRX编号 6、删除TRX：
ZERD：TRX编号
7、删除BTS：（注意：删除BTS的同时会删除该扇区的相邻小区）
ZEQD：BTS编号 8、删除BCF：
ZEFD：BCF编号 9、删除OMU和TRX信令：
ZDSD：OMU信令名称，TRX信令名称
10、在删除边际站时，须注意：
先用ZQWL查看该BCF下的FC STM Q1所处的位置， 然后用ZQWR命令删除该BCF下的FC STM Q1E 最后就可用ZEFD命令删除BCF。 附：范列 基站数据
ZDSE:OM026:BCSU,0:62,1:16,101-25,6:; ZDTC:OM026:WO;
ZEFC:26,P:DNAME=OM026,REF=7;
ZEQC:BCF=26,BTS=26,NAME=ZHANGZHAINEW1,REF=7:CI=2311,BAND=900:NCC=7,BCC=7:MCC=460,MNC=00,LAC=14102:HOP=RF,HSN1=51,HSN2=0:; ZEUC:BTS=26,REF=7:; ZEHC:BTS=26,REF=7:; ZEQV:BTS=26:GENA=N:; ZEQV:BTS=26:GENA=Y,NSEI=:; ZEQA:BTS=26:MAL=11,MO=0,MS=1:; ZEQM:BTS=26:RDIV=Y:;
ZDSE:T0261:BCSU,1:0,1:32,101-31,4:; ZDTC:T0261:WO;
ZERC:BTS=26,TRX=1::FREQ=77,TSC=7,PCMTSL=101-1:DNAME=T0261:CH0=MBCCH,CH1=SDCCH:;
ZDSE:T0262:BCSU,2:0,2:32,101-31,0:; ZDTC:T0262:WO;
附：相邻小区：
ZEAC:BTS=26:LAC=14102,CI=1142:NCC=4,BCC=4,FREQ=80:PMRG=5,LMRG=,QMRG=,MRGS=,PRI=,OF=,SL=-95,AUCL=-47,PMAX1=33,PMAX2=30,TRHO=,ACL=,FMT=,POPT=,CTY=,CHAIN=,DRT=-85,SYNC=N;
ZEAC:BTS=2:LAC=14102,CI=2311:NCC=7,BCC=7,FREQ=77:PMRG=5,LMRG=,QMRG=,MRGS=,PRI=,OF=,SL=-95,AUCL=-47,PMAX1=33,PMAX2=30,TRHO=,ACL=,FMT=,POPT=,CTY=,CHAIN=,DRT=-85,SYNC=N;
ZEAC:BTS=26:LAC=14094,CI=2303:NCC=1,BCC=3,FREQ=94:PMRG=5,LMRG=,QMRG=,MRGS=,PRI=,OF=,SL=-95,AUCL=-47,PMAX1=33,PMAX2=30,TRHO=,ACL=,FMT=,POPT=,CTY=,CHAIN=,DRT=-85,SYNC=N;
ZEAC:BTS=26:LAC=14102,CI=2312:NCC=2,BCC=5,FREQ=85:PMRG=5,LMRG=,QMRG=,MRGS=,PRI=,OF=,SL=-95,AUCL=-47,PMAX1=33,PMAX2=30,TRHO=,ACL=,FMT=,POPT=,CTY=,CHAIN=,DRT=-85,SYNC=Y;
ZEAC:BTS=27:LAC=14102,CI=2311:NCC=7,BCC=7,FREQ=77:PMRG=5,LMRG=,QMRG=,MRGS=,PRI=,OF=,SL=-95,AUCL=-47,PMAX1=33,PMAX2=30,TRHO=,ACL=,FMT=,P
百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库NSN Flexi BSC 操作-sgong - 图文(4)在线全文阅读。
相关推荐：