B series CGI protocol(3)

alarm_ioin_level alarm_iolinkage alarm_ioout_level alarm_mail alarm_upload_interval alarm_schedule_enable alarm_schedule_sun_0 alarm_schedule_sun_1 alarm_schedule_sun_2 alarm_schedule_mon_0 alarm_schedule_mon_1 alarm_schedule_mon_2 alarm_schedule_tue_0 alarm_schedule_tue_1 alarm_schedule_tue_2 alarm_schedule_wed_0 alarm_schedule_wed_1 alarm_schedule_wed_2 alarm_schedule_thu_0 alarm_schedule_thu_1 alarm_schedule_thu_2 alarm_schedule_fri_0 alarm_schedule_fri_1 alarm_schedule_fri_2 alarm_schedule_sat_0 alarm_schedule_sat_1 alarm_schedule_sat_2 Alarm io in level，0：low；1：high 0：disable alarm io linkage；1：enable Alarm io out level，0：low；1：high 0：disable alarm mail notification；1：enable Alarm upload interval（second），0：disable Alarm schedule enable or disable Sunday alarm schedule，24 hours per day，15 mins per hours, it is divided into 96 time period 。 Bit 0-95：0：motion detection disarmed；1：armed upgrade_firmware.cgi

Description：upgrade fireware Authority：adminstrator

Syntax：/upgrade_firmware.cgi[?user=&pwd=&next_url=]

Instruction：the CGI must be adopted to “post” ，pack the documents and send them to the ip

camera.

upgrade_htmls.cgi

Description：upgrade web page Authority：adminstrator

Syntax：/upgrade_htmls.cgi[?user=&pwd=&next_url=]

Instruction：the CGI must be adopted to “post” ，pack the documents and send them to the ip

camera.

set_alias.cgi

Description：set alias parameter Authority：adminstrator

Syntax：/set_alias.cgi?alias=[&user=&pwd=&next_url=] Parameter：

alias：length <= 20

set_datetime.cgi

Description：set date time parameter Authority：adminstrator

Syntax：/set_datetime.cgi?tz=&ntp_enable=&ntp_svr=[&now=&user=&pwd=&next_url=] Parameter：

now tz ntp_enable ntp_svr now：the seconds it goes from 1970-1-1 0:0:0 Time area：the different seconds from standard GMT 0：disable ntp；1：enable Ntp server，length <= 64 set_users.cgi

Decription：set user parameter

Authority：adminstrator Syntax：

/set_users.cgi?user1=&pwd1=&pri1=&user2=&pwd2=&pri2=&user3=&pwd3=&pri3=&user4=&pwd4=&pri4=&user5=&pwd5=&pri5=&user6=&pwd6=&pri6=&user7=&pwd7=&pri7=&user8=&pwd8=&pri8=[&user=&pwd=&next_url=] Parameter：

user1 pwd1 pri1 … user8 User 1 Name, Legenth<=12 User 1 Password, Legenth<=12 Usre 1 Authority，0：vVisitor；1：Opeartor；2：Administrador User 8 Name pwd8 pri8

User 8 Password Usre 8 Authority set_network.cgi

Description: setting equipment basic network specification Authority: Administrator

Syntax: /set_network.cgi?ip=&mask=&gateway=&dns=&port=[&user=&pwd=&next_url=] Specification

ip IP address，if leave this setting blank，it will achieve daymic IP address and will ignor the mask. Gateway, DNS etc Mask Switch Dns Server Port Number mask gateway dns port set_wifi.cgi

Description：Setting WIFI specification Authority：Admin Syntax：

/set_wifi.cgi?enable=&ssid=&encrypt=&defkey=&key1=&key2=&key3=&key4=

&authtype=&keyformat=&key1_bits=&key2_bits=&key3_bits=&key4_bits=&channel=&mode=&wpa_psk=[&user=&pwd=&next_url=] Specification：

enable ssid channel mode encrypt authtype keyformat defkey key1 0：Disable WIFI function；1：Enable Plan to add ssid of WIFI，legenth <= 40 Reserve =5 Reserve =0 0：Disable encycription；1：wep encycription；2：wpa tkip；3：wpa aes；4：wpa2 aes；5：wpa2 tkip+aes wep check mode，0：open；1：share Wep key format，0：16 Digits；1：ascii symbol Wep middle key：0-3 Wep key1，legenth <= 30 key2 key3 key4 key1_bits key2_bits key3_bits key4_bits wpa_psk Wep key1 wep key2 Wep key3 wep key1 legenth，0：64 bits；1：128 bits Wep key 2 legenth，0：64 bits；1：128 bits Wep key 3 legenth，0：64 bits；1：128 bits Wep key 4 legenth，0：64 bits；1：128 bits wpa psk key，legenth <= 64 set_pppoe.cgi

Description：Setting PPPOE Authority：Admin Syntax：

/set_pppoe.cgi?enable=&user=&pwd=&mail_ip=[&cam_user=&cam_pwd=&next_url=] Specification ：

enable user pwd 0：Disable pppoe；1：Enable Pppoe Dial user，legenth <= 64 Pppoe Dial password，legenth <= 64 set_upnp.cgi

Description：Setting UPNP Authority：Admin

Syntax：/set_upnp.cgi?enable=[&user=&pwd=&next_url=] Specification：

enable 0：Disable upnpport forwarding function；1：Enable set_ddns.cgi

Description：Setting DDNS Authority：Admin Syntax：

/set_ddns.cgi?service=&user=&pwd=&host=&proxy_svr=&proxy_port=[&restart_dyndns=&cam_user=&cam_pwd=&next_url=] Specification： Service 0：Disable ddns service 1：Oray 2：DynDns.org(dyndns) 3：DynDns.org(statdns) 4：DynDns.org(custom) 5：Reserve 6：Reserve 7：Reserve 8：3322(dyndns) 9：3322(statdns) User Pwd Host proxy_svr proxy_port restart_dyndns Ddns name，legenth <= 64 Ddns password，legenth <= 64 Ddns domain name，legenth <= 64 Agent server address（dyndns service Only can be applied in China Mainland），legenth <= 64 Agent server port number 1：Renew dyndns；0：No set_ftp.cgi

Description：Setting ftp

Authority：Admin Syntax

/set_ftp.cgi?svr=&port=&user=&pwd=&mode=&dir=&upload_interval=[&cam_user=&cam_pwd=&next_url=] Parameter：

Svr Port User Pwd Dir Mode Upload_interval Ftp server addaress，legenth <= 64 ftp server port number ftp server log in user name，legenth <= 64 ftp server log in password，legenth <= 64 ftp server storage catalog，legenth <= 64 0：portmode；1：pasv mode Breaks of Upload pictures（per second），0： disable，0-65535 set_mail.cgi

Description：Setting equipment email options Authority：Admin Syntax

/set_mail.cgi?svr=&user=&pwd=&sender=&receiver1=&receiver2=&receiver3=&receiver4

百度搜索“77cn”或“免费范文网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，免费范文网，提供经典小说综合文库B series CGI protocol(3)在线全文阅读。